Product ID:5000 EPOXY POLYAMIDE COATINGS 2COMP PAINT (
MSDS Date:03/15/1990
FSC:8030
NIIN:01-124-9760
Kit Part:Y
MSDS Number: BQXWR

PRO-LINE PAINT CO

2646 MAIN ST
SAN DIEGO, CA 92113-3697
US

Emergency Phone: 619-728-3192;619-274-8357

Info Phone: 619-231-2313;619-232-8968

Preparer: E. SOETERIK

Cage: 9D157

PRO-LINE PAINT CO

SAN DIEGO, CA 92113-3697 US

Telephone: 619-231-2313; 619-232-8968

Cage: 9D157

EPICHLOROHYDRIN BIS-PHENOL A

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 21.8%

XYLENE, N-NONANE,

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 11.7%

OSHA PEL 100 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)

AROMATICS, CUMENE.

RTECS: 9999999ZZ

TALC (POWDER), CONTAINING NO ASBESTOS; (MAGNESIUM SILICATE

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 11%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

RHEOLOGICAL ADDITIVE

Fraction By Weight: 1.3%

340 G/L

RTECS: 9999999VO

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: COUGHING, SHORTNESS OF BRTH,
MAY CAUSE DIZZ. SKIN/EYES: BURNING SENSATION, RASH BREAKOUT W/SKIN
TURNING PINK & REDNESS OF EYES. ABSORB THRU SKIN: SKIN RASH MAY
CAUSE BURNING OF SKIN & INFLAM.IN GEST: VOMIT DUE TO UNPLEASANT
TASTE.MAYCAUSE DIARR/STOM CRAMPS. RPTS HAVE ASSOC RPTD & PRLNGD
OCCUP OVEREXP TO (SUPDAT)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:NAUSEA, DIZZINESS, HEADACHE AND CONVULSIONS.
Medical Cond Aggravated by Exposure:ASTHMA, EMPHYSEMA AND OTHER
RESPIRATORY DISEASES.

First Aid:CONSULT W/POIS CNTRL CNTR & FOR WORKERS WHO ARE EXPOS
REGULARLY, PROVIDE DETAILED PERIODIC EXAMINATIONS.EYE: FLUSH IMMED
W/FRESH WATER BY AN EYE WASH APPARATUS/BY HAND.SEEK MED ATTN.SKIN:
WASH IMMED W /WATER. THEN WASH W/SOAP & WATER, RINSEIMMED.IF
BURNING SENSATION,RASH BREAK OUT/OTHER SYMPS OCCUR SEEK MED ATTN.
INHAL:MOVE PERSON TO FRESH AIR;ARTF RESP IF NEC.SEEK MED ATTN.
INGEST: SEEK MED ATTN.

Flash Point Method:SCC
Flash Point:99F,37.2C
Lower Limits:1.4%
Upper Limits:11.2%
Extinguishing Media:WATER SPRAY, FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . BLANKET FLAME WITH ONE OF ABOVE MEDIA.
Unusual Fire/Explosion Hazard:KEEP MATERIAL AWAY FROM HEAT, SPARKS, AND
OPEN FLAMES. EXPLOSIVE WHEN HEATED. STAY SAFE DISTANCE FROM FIRE
WHEN EXTINGUISHING.

Spill Release Procedures:REMOVE ALL KIND OF IGNITION SOURCES. PROVIDE
SUFFICIENT VENTILATION. PROTECT CLEANUP MAN WITH 8540 3M CORP
NIOSH/MSHA APPROVED RESPIRATOR, GOGGLES AND RUBBER GLOVES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP IN DRY AREA AT ROOM
TEMPERATURE,77F PLUS OR MINUS 5 DEGREES. PREVENT CANS FROM
CORROSION AND CONSEQUENTLY, SPILLAGE. USE ONLY WITH ADEQUATE VENT.
Other Precautions:TRAIN EMPLOYEES OF ALL SPECIAL HANDLING PROCEDURES IN
THIS SECTION BEFORE THEY WORK WITH THIS PRODUCT.

Respiratory Protection:USE 8540 3M CORP NIOSH/MSHA APPROVED RESPIRATOR.
WHEN USING IN CONFINED AREA, USE NIOSH/MSHA APPROVED AIR-FED HOOD.
Ventilation:USE LOCAL EXHAUST WHEN APPLYING MATERIAL IN CONFINED AREAS.
KEEP VAPORS BELOW TLV.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE PROT CLTHG & CHANGE CONTAMD CLTHG
IMMEDIATELY. PROVIDE EMER SHOWERS & EYEWASH AT STATIONARY PAINT
APPLIC FACILITIES.
Work Hygienic Practices:WASH CONTAMINATED EQUIPMENT WITH FRESH WATER.
Supplemental Safety and Health
HEALTH HAZARDS: SOLVENTS WITH PERMANENT BRAIN AND NERVOUS SYSTEM
DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND
INHALING CONTENTS MAY BE HARMFUL OR FATAL.

Boiling Pt:B.P. Text:244F,118C
Melt/Freeze Pt:M.P/F.P Text:128F,53C
Vapor Pres:4.4 @ 20C
Vapor Density:2.1
Spec Gravity:1.3
Evaporation Rate & Reference:0.43 (BUTYL ACETATE=1)
Solubility in Water:POOR
Appearance and Odor:TYPICAL PAINT APPEARANCE WITH STRONG ALCOHOL ODOR.

Stability Indicator/Materials to Avoid:YES
WHEN "A" & "B" ARE MIXED, KEEP AWAY FROM HEAT. HEAT WILL CREATE A RAPID
CHEMICAL REACTION. EMITS HEAT.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES. DO NOT ALLOW
VAPOR TO ACCUMULATE.
Hazardous Decomposition Products:FLAMMABLE FUMES MAY ACCUMULATE IN
CONFINED AREA AND SPARKS OR OPEN FLAMES MAY IGNITE IT.
Conditions to Avoid Polymerization:HEAT, SPRAKS AND OPEN FLAMES WHEN A
& B ARE MIXED.

Waste Disposal Methods:USE ANY KIND OF ABSORBENT TO ABSORB SPILLED
MATERIAL AND PUT IN A METAL CONTAINER MARKED "DO NOT USE THIS
MATERIAL". DISPOSE OF LEGALLY. NOTE: DISPOSE OF ALL WASTES IN
ACCORDANCE WITH FEDERAL, STATE A ND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.